To be Global leader of Welding Materials! Xlnxiang Kolanky Technical Co. Ltd Tel: +86 373 5796637 Email: email@example.com Web: www.xlnxiangkolanky.com Material Safety Data Sheet 1 – Product And Company Identification Material name: Copper Coated Aluminum Welding Rod. Version #: 01 Issue date: 08- May-2019 Revision date: Supersedes date: CAS #: Mixture Product names: Copper Coated Aluminum Welding Rod. Product Use: Metal welding. Manufacturer information Manufacturer/Supplier: Xlnxiang Kolanky Technical Co. Ltd Add: Xinxiang City, Henan, China Telephone number: +86-373-5796637 Emergency Telephone Numbers: +86-13603838996 2 – Hazards Identification Physical state：Solid. Appearance：Metallic-copper wire and rods. Emergency overview: May cause eye, skin and respiratory tract irritation. Potential health effects Routes of exposure: Inhalation. Skin contact. Eye contact. Ingestion. Eyes: May cause eye irritation. Skin: Contact may cause irritation and redness. Prolonged skin contact may cause dermatitis. Contact with molten material may cause thermal burns. Inhalation: Irritating to the nose, throat, and respiratory tract. Overexposure to Copper To be Global leader of Welding Materials! Xlnxiang Kolanky Technical Co. Ltd Tel: +86 373 5796637 Email: firstname.lastname@example.org Web: www.xlnxiangkolanky.com fumes may produce metal fume fever. Symptoms of metal fume fever resemble the flu and include sweating, fever, headache, chills, muscle aches, nausea, vomiting, weakness, and tiredness. Ingestion: Copper poisoning can result in hemolytic anemia and kidney, liver and spleen damage. Target organs: Respiratory system Eyes. Skin. Kidneys. Chronic effects: Chronic inhalation of fumes or dust may cause irritation or other respiratory conditions (e.g., bronchitis). Signs and symptoms Contact may cause irritation and redness. Dust may irritate respiratory system. Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting. During brazing operations, the most significant route of overexposure is via inhalation of fumes. Potential environmental effects: Alloys in massive forms present a limited hazard for the environment. 3 – Composition / Information on Ingredients COMPONENTS CAS# PERCENT Phosphorus 7723-14-0 8 % Copper 7440-50-8 6 % Aluminum 7608-20-0 86 % Composition comments: All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. 4 – First Aid Measures First aid procedures Eye contact: Rinse immediately with plenty of water for at least 15 minutes. Remove Any contact lenses. Get medical attention if irritation develops or persists. Skin contact: Remove contaminated clothes and rinse skin thoroughly with water for at Least 15 minutes. Get medical attention if irritation develops and persists. To be Global leader of Welding Materials! Xlnxiang Kolanky Technical Co. Ltd Tel: +86 373 5796637 Email: email@example.com Web: www.xlnxiangkolanky.com Inhalation: Remove person from contaminated area to fresh air. Apply artificial Respiration if needed. Call a physician if symptoms develop or persist. Ingestion: Do NOT induce vomiting. Immediately rinse mouth and drink a cupful of Water. Never give anything by mouth to an unconscious person. Get medical attention immediately. Notes to physician : Treat symptomatically. General advice: Show this safety data sheet to the doctor in attendance. 5 – Fire Fighting Measures Flammable properties : Solid metal is not flammable; however, finely divided metallic dust or powder may form an explosive mixture with air. Do not use water on molten metal: Explosion hazard could result. Extinguishing media Suitable extinguishing media: Extinguish with foam, carbon dioxide or dry powder. Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire. Protection of firefighters Specific hazards arising from the chemical: Fire or high temperatures create: Metal oxides Fire fighting equipment/instructions: Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Move containers from fire area if you can do it without risk. 6 – Accidental Release Measures Personal precautions: Keep unnecessary personnel away. Avoid inhalation of dust from the spilled material. Wear protective clothing as described in Section 8 of this MSDS. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not contaminate water. To be Global leader of Welding Materials! Xlnxiang Kolanky Technical Co. Ltd Tel: +86 373 5796637 Email: firstname.lastname@example.org Web: www.xlnxiangkolanky.com Methods for containment: Stop leak if you can do so without risk. Local authorities should be advised if significant spillages cannot be contained. Methods for cleaning up Large Spills: Sweep up and place into a proper container for disposal. Avoid the generation of dusts during clean-up. Small Spills: Wipe up spilled material and place in a suitable container for disposal. For waste disposal, see Section 13 of the MSDS. Other information: Clean up in accordance with all applicable regulations. 7 – Handling and Storage Handling: Keep formation of airborne dusts to a minimum. Provide appropriate exhaust ventilation at places where dust is formed. Avoid inhalation of dust and fumes. Avoid contact with skin and eyes. Wear appropriate personal protective equipment (See Section 8). Do not get this material on clothing. Do not eat, drink or smoke when using the product. Wash thoroughly after handling. Avoid release to the environment. Storage: Store in tightly closed original container in a dry, cool and well-ventilated place. Store in a closed container away from incompatible materials. Keep away from food, drink and animal feeding stuffs. 8 – Exposure Controls / Personal Protection Engineering controls: Provide adequate ventilation. Observe Occupational Exposure Limits and minimize the risk of inhalation of dust. Shower, hand and eye washing facilities near the workplace are recommended. Personal protective equipment Eye / face protection: Wear safety glasses with side shields (or goggles). When these products are used in conjunction with brazing, it is recommended that safety glasses, goggles, or face-shield with filter lens of appropriate shade number be worn. Skin protection: Chemical resistant clothing is recommended. When these products are used in conjunction with brazing, wear protective clothing that protects from sparks and flame. To be Global leader of Welding Materials! Xlnxiang Kolanky Technical Co. Ltd Tel: +86 373 5796637 Email: email@example.com Web: www.xlnxiangkolanky.com Respiratory protection: Use a respirator when local exhaust or ventilation is not adequate to keep exposures below the TLV. In a confined space a supplied respirator may be required. General hygiene considerations: Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove. 9 – Physical & Chemical Properties Appearance: Metallic-copper wire and rods. Physical state: Solid. Form: Solid. Color: Copper. Odor: None. Odor threshold: Not available. PH: Not available. Vapor pressure: Not available. Vapor density: Not available. Boiling point: Not available. Melting point: 1310 °F (710 °C) Solubility (water): Not available. Specific gravity: 8.94 (H2O=1) Flash point : Not available. Flammability limits in air, upper, % by volume: Not available. Flammability limits in air, lower, % by volume: Not available. Auto-ignition temperature：Not available. 10 –Chemical Stability & Reactivity Information Chemical stability: Material is stable under normal conditions. Conditions to avoid: Extreme temperatures. Contact with incompatible materials. Incompatible materials: Strong oxidizing agents. Strong acids. Strong bases. Halogens. To be Global leader of Welding Materials! Xlnxiang Kolanky Technical Co. Ltd Tel: +86 373 5796637 Email: firstname.lastname@example.org Web: www.xlnxiangkolanky.com Acid chlorides. Hazardous decomposition products: Thermal decomposition may produce copper, phosphorous, and silver compounds and a variety of metal oxides. Possibility of hazardous reactions: Will not occur. 11 – Toxicological Information Sensitization: Rare cases of allergic contact dermatitis have been reported in people working with copper dust. Acute effects: High concentrations of freshly formed fumes/dusts of metal oxides can produce symptoms of metal fume fever. When heated, the vapors/fumes given off may cause respiratory tract irritation. Local effects: Elevated temperatures or mechanical action may form dust and fumes which may be irritating to the eye, mucous membranes and respiratory tract. Chronic effects: Prolonged exposure may cause chronic effects. Ingestion of silver may cause a permanently benign bluish gray discoloration to the skin (argyria). Carcinogenicity: Not classifiable as to carcinogenicity to humans. Epidemiology: No data available. Mutagenicity: Not classified. Reproductive effects: Not classified. Further information: No other specific acute or chronic health impact noted. 12- Ecological Information Ecotoxicity: Alloys in massive forms present a limited hazard for the environment. Environmental effects: Significant environmental persistence and bioaccumulation can be expected. Aquatic toxicity: May cause long lasting harmful effects to aquatic life. Persistence and degradability: The product is not biodegradable. Bioaccumulation / Accumulation: The product contains potentially bioaccumulation substances. Mobility in environmental media: Alloys in massive forms are not mobile in the To be Global leader of Welding Materials! Xlnxiang Kolanky Technical Co. Ltd Tel: +86 373 5796637 Email: email@example.com Web: www.xlnxiangkolanky.com environment. 13 – Disposal Considerations Disposal instructions: Dispose in accordance with all applicable regulations. Waste from residues / unused products: Scrapped material should be sent for refining to recover precious metal content. Solid metal and alloys in the form of particles may be reactive. Its hazardous characteristics, including fire and explosion, should be determined prior to disposal. 14- Transport Information DOT Not regulated as a hazardous material by DOT. IATA Not regulated as dangerous goods. IMDG Not regulated as dangerous goods. TDG Not regulated as dangerous goods. 15 – Regulatory Information This product is not known to be a “Hazardous Chemical”, more lawful information, please contact your local department. Hazard categories Immediate Hazard – No Delayed Hazard – No Fire Hazard – No Pressure Hazard – No Reactivity Hazard – No To be Global leader of Welding Materials! Xlnxiang Kolanky Technical Co. Ltd Tel: +86 373 5796637 Email: firstname.lastname@example.org Web: www.xlnxiangkolanky.com 16 – Other Information This MSDS was prepared sincerely on the basis of the information we can obtained. However, any warranty shall not be given regarding the data contained and the assessment of hazards and toxicity. Prior to use, please investigate not only the hazards and toxicity information but also the laws and regulations of the organization, area and country where the products are to be used, which shall be given the first priority. Products are supposed to be promptly after purchase in consideration of safety. Some new information or amendments may be added afterwards. If the products are to be used far behind the expected time of use or you have any question, please feel free to contact us. The stated cautions are for normal handing only. In case of special handing, sufficient care should be taken, in additional to the safety measures suitable for the situation. The products must be handled only by those who are familiar with specialized and have experience or under the guidance of those specialists throughout use from opening to storage and disposal. Safe usage conditions shall be set up on each user’s own responsibility.
Sell E6013 Welding Electrode Blue Welding Flux Coated
ER70S2 – Mild Steel TIG Welding Rod
Copper Coated Aluminium Welding Rod ZSA-929685
it is composed of aluminum-copper-Phosphorus alloy. It has good toughness, high temperature resistance and corrosion resistance, etc. It’s suitable for welding mild steel, cast iron, nickel alloy, hard alloy and other materials. Xlnxiang Kolanky Welding started in the 1980’s, we are the member of China Welding Association and Henan Welding Professional Committee Syndic Unit. Our company approved by ISO9001:2008 and ISO4001:2004, and all of the products meet SGS and ROHS directive requirements. We take more than 60-70% marketing shares in domestic, including the international famous companies, such as Midea Group and Gree Electric Appliances, Danfoss, Panasonic, LG, Samsung, etc. MSDS-copper coated aluminium welding brazing rod ZSA-929685